Jpdiag

"File generated On 26/10/2025 18:42:14"
"Software version 2.0.4.8"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = "
"User Bike = mts 1200s 2012"

"CAN Bike = "
"Ecu = MELCO HIMEJI "
"Hardw = J001"
"Softw = 00080003"
"OilService = NO"
"DesmoService = NO"

" vin DATA
vin 037F1A11
vin 7F1A31
vin ...

jpl250rs wrote: Mon Oct 20, 2025 4:40 pm you mean you cannot naviguate to the other tab ?

maybe the message is just not refreshed

Yes, could be. I can navigate through the tabs.
I can send the log as well for the license?

Tried to connect with the DDA cable e seems working but stuck in "getting some pids" . I've waited for 10 min, now I will try waiting more time. Just for info to the others, only if you are on the "battery voltage menu" the ignition will stay on more than 5 mins otherwise will switch off ...

the baud rate is ok because under conect button i see elmv1.5
i see now in the picture what he is doing wrong
he still using the K line
you need to buy a DDA ( 4 pins) to use the CAN line instead of the line

Ordered the DDA cable, tomorrow night I will test it :) finger crossed!
The cable is ...

yes now the link with the elm is correct but no data comes from the bike.
did you switch ignition on ?
have you sure you are connected to the right connector ?

Yes right, the ignition were on as well as the display. The connector have a label with diag on it, so I think it is the right one.
The ...

the bluetooth one is ok.
you need to attache a serial comport to it and use it as a serial one

https://img001.prntscr.com/file/img001/1Cqwt_cDTeOtawq9_VjZLQ.png


Tried to use the bluetooth one, seems working better but an error occurred. Canbus error, please check your elm and or wiring. I've ...

Thank you jpl250rs, I already have an elm interface but Bluetooth, I need an USB one? Another question, for the connection bike-elm is it good the one I already have? This one: https://amzn.eu/d/3wyxuMd

Thank you again for the support

Hi everyone,
I'm trying to connect melco to my multistrada 1200s y2011 without success.
I've bought the cable "AMHTDOL VAG KKL 409.1 USB Chip FTDI FT232RL" and the adapter "3 pin a 16 pin OBD2 fiat with clip" these are the links:
https://www.amazon.it/dp/B0F6VK4NQS?ref=ppx_pop_mob_ap_share
YACSEJAO ...