Jpdiag

Hi,

I tried again with a new USB ELM327 cable and tested in both modes (AnyBike and M3C/M3D).

Unfortunately the ECU is still not properly detected and the VIN is not read.

Below are the debug outputs from both tests.


"File generated On 21-2-2026 13:55:51"
"Software version 2.0.4.9"
"ELM version ...

I’ve tried searching online, but I’m not completely sure which one you’re referring to.

Do you maybe have one or two direct links to the correct OBD cable, so I can be sure I’m ordering the right one?

Thanks in advance.

Thanks! I’ll try another interface.
Could you let me know which ELM327 model/interface you recommend for this?
I currently bought one from AliExpress — that one doesn’t seem to work fully.
Do you have a specific brand or model that you know works well with Ducati and MelcoDiag?
Thanks in advance.

"File generated On 3-2-2026 11:40:54"
"Software version 2.0.4.9"
"ELM version : ELM327 v1.4"

"Auto Detect Bike = "
"User Bike = scrambler / 2023"

"CAN Bike = "
"Ecu = "
"Hardw = "
"Softw = "
"OilService = NO"
"DesmoService = NO"

" vin:NO DATA>

14 PIDS active founds

188_7FFF7CC3805F465E
18C ...

"File generated On 31-1-2026 16:48:57"
"Software version 2.0.4.9"
"ELM version : ELM327 v1.4"

"Auto Detect Bike = "
"User Bike = scrambler / 2023"

"CAN Bike = "
"Ecu = "
"Hardw = "
"Softw = "
"OilService = NO"
"DesmoService = NO"

" vin:NO DATA>

14 PIDS active founds

024_0000000000000D8B
080 ...

Hi,
Thanks for clarifying.
I understand now that the previous text was not the correct report. I tried to generate the report as you described, but I’m running into the following behavior:
AnyBike mode
When I select AnyBike, the system shows “no ECU data”.
I then press Write Report.
After that, when ...

Thanks for your message.
I’m not sure which ECU my bike has, and I don’t know how to identify it exactly. The bike is a Ducati Scrambler 800 Nightshift (2023).
When I select M3C/M3D, the software connects, but I am not able to reset the service indicator.
When I select AnyBike, the VIN is not read ...

I downloaded the software and I am able to connect to the motorcycle without any issues. In the software there is a section where you can select the ECU. I selected M3C and M3D, and I am able to connect immediately without purchasing a license.
However, when I go to Resets and try to reset the ...