Immobilizer Disable
Forum rules
Do not PM , feel free to open a new post if you can find a thread talking about your issue
Do not PM , feel free to open a new post if you can find a thread talking about your issue
-
shopPC1010
- Posts: 1
- Joined: Wed Jun 18, 2025 1:22 am
Immobilizer Disable
Is there anyway to disable the Immobilizer or get the PIN code from the ECU using the software ? I have a DTC E8 for the immobilizer “No or Poor Signal” and want to just disable it so I can run my bike.
Re: Immobilizer Disable
you need to reflash the ecu to disable the immo ,it's not possible via jpdiag only
Jpdiag can check if the ecu has the function disabled
Jpdiag can check if the ecu has the function disabled