MTS 1260s request for license fails

For bikes using the can line usually from 2010 and up
works with elm cables only
Forum rules
Do not send PM , if your can't find your problm , please open a new thread with your bike and issue
Post Reply
atelopus
Posts: 1
Joined: Tue Jul 01, 2025 10:31 am

MTS 1260s request for license fails

Post by atelopus »

Hi.
I am trying to request a license but it looks like there isn't enough information retrieved to send the request for the license since I get a failure.
My interface is ELM 1.5 and it seems to be able to retrieve some information through the cable.
I have nothing to reset at the moment but I wan't to make sure it works until it is time for annual service.

The year model is 2018, it was not filled in automatic. I have no idea how to get further.


Regards,
Dennis


---

"File generated On 2025-06-26 08:47:46"
"Software version 2.0.4.4"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = MTS 1260"
"User Bike = 2018"

"CAN Bike = "
"Ecu = "
"Hardw = "
"Softw = "
"OilService = NO"
"DesmoService = NO"

" vin 145A8F035A444D4143303041414A42303031303532
vin 7F1A22
vin 7F1A22
vin 7F1A22

14 PIDS active founds

174_FA7F00006B6A01F2
178_EC7F052073770196
17C_0000000090930166
022_000000000003FB6E
023_000000FC806B0B08
188_80037BD77F9B4B89
024_000000000000047E
080_1B22BCC010200454
100_C712046045000495
020_0000F50000004CC9
300_3988000A1BFB06F8
230_081E0C000035F61C
018_0002A000E2004911
019_9609600000000926
"
"Vin = ZDMAC00AAJB001052"
"DTC = "
"864C2433"
"Bike = 2"
"lic not found
ZDMAC00AAJB001052
CAN ERROR
ZDMAC00AAJB001052
"
"not registered"
jpl250rs
Site Admin
Posts: 418
Joined: Sat Jan 11, 2025 2:36 pm

Re: MTS 1260s request for license fails

Post by jpl250rs »

you can replace the 1st blank line with no data in the prefilled information during the registration ,
it shall be accepted
Post Reply