Monster 796, ABS, 2011 Reads but not resetting

For bikes using the can line usually from 2010 and up
works with elm cables only
Forum rules
Do not send PM , if your can't find your problm , please open a new thread with your bike and issue
Post Reply
Ciganek1
Posts: 7
Joined: Sat Mar 28, 2026 7:07 pm

Monster 796, ABS, 2011 Reads but not resetting

Post by Ciganek1 »

Image
Top
Ciganek1
Posts: 7
Joined: Sat Mar 28, 2026 7:07 pm

Re: Monster 796, ABS, 2011 Reads but not resetting

Post by Ciganek1 »

I still can't reset the oil service or desmo reset. Melcodiag properly recognizes the ecu and connects to the ecu, I click the oil service reset button or the desmo reset button but nothing happens. The cable is ELM327 v1.5. Please
help
Top
jpl250rs
Site Admin
Posts: 1040
Joined: Sat Jan 11, 2025 2:36 pm

Re: Monster 796, ABS, 2011 Reads but not resetting

Post by jpl250rs »

Can you post the report ?
Top
Ciganek1
Posts: 7
Joined: Sat Mar 28, 2026 7:07 pm

Re: Monster 796, ABS, 2011 Reads but not resetting

Post by Ciganek1 »

"File generated On 30.3.2026. 17:42:17"
"Software version 2.0.4.9"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = "
"User Bike = M796 ABS 2011"

"CAN Bike = "
"Ecu = 5WY8691-AA"
"Hardw = QD0A3010"
"Softw = A3IU1NEI"
"OilService = YES"
"DesmoService = YES"

" vin:100E5A8C3030363021313134303234202220AAAAAAAAAAAA

10 PIDS active founds

100_0000000000400001
211_31840030D2000054
080_0000000000000000
081_01000000C9000000
280_20204D4F4E535445
290_5220373936202030
201_0080000000000000
010_C800000000000000
020_0000084FA1000000
028_0
"
"Vin = 0060114024 "
"DTC = 10115805017520048560D60200D60000D60400AAAAAA"
"047C2856"
"Bike = 4"
"lic found
060114024hard :QD0A3010
soft :A3IU1NEI
"
"registered"
Top
Ciganek1
Posts: 7
Joined: Sat Mar 28, 2026 7:07 pm

Re: Monster 796, ABS, 2011 Reads but not resetting

Post by Ciganek1 »

What's the problem?
Top
jpl250rs
Site Admin
Posts: 1040
Joined: Sat Jan 11, 2025 2:36 pm

Re: Monster 796, ABS, 2011 Reads but not resetting

Post by jpl250rs »

all is ok on cables and registration
you can try to unplug batery for 5 minutes , and give it a new try
Top
Ciganek1
Posts: 7
Joined: Sat Mar 28, 2026 7:07 pm

Re: Monster 796, ABS, 2011 Reads but not resetting

Post by Ciganek1 »

Disconnecting the battery for 30 minutes didn't help either.
Top
jpl250rs
Site Admin
Posts: 1040
Joined: Sat Jan 11, 2025 2:36 pm

Re: Monster 796, ABS, 2011 Reads but not resetting

Post by jpl250rs »

when you press reset button , the leds are blinking on the obd device ?
Top
Ciganek1
Posts: 7
Joined: Sat Mar 28, 2026 7:07 pm

Re: Monster 796, ABS, 2011 Reads but not resetting

Post by Ciganek1 »

Yes, the lights are flashing but the service key still remains on the display.
Top
Post Reply

Return to “Melcodiag”