Monster 821 2015 missing information

[ThisMyUsername]

Hi

I tried to check error information on my Monster, but looks like I don't get enought information to request a license. When I connect to bike, the connection works but at one point I have to choose between 2011 and 2012 model year which both are wrong.

I used ELM 327 v1.5 interface (https://www.astools.eu/collections/elm3 ... -cable-usb) with default settings. If I tried with any other settings, I got error message about initiating ELM device.

Debug info below. Thank you in advance!

"File generated On 11/09/2026 16.20.03"
"Software version 2.0.5.3"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = "
"User Bike = Monster 2015"

"CAN Bike = "
"Ecu = N/A"
"Hardw = N/A"
"Softw = N/A"
"OilService = NO"
"DesmoService = NO"

"
0 PIDS active founds

"
"Vin = "
"DTC = "
"E07EEA41"
"Bike = 7"
"lic not found
PaniVIN:
MultiVIN:
M3dVin:
DashVin2:
DashVin:
EcuVin:
"
"not registered"

[jpl250rs]

hmmm elm seems not compliant
those who succeed make it works , put the switch on HS

don't forget to switch on ignition too

[ThisMyUsername]

hmmm elm seems not compliant
those who succeed make it works , put the switch on HS

don't forget to switch on ignition too

Guess I need a different ELM then. Recommendations? I saw a mention about v1.4 on some topic when I was trying to find information.

There are no markings on which side is HS and which is MS, but I got some kind of connection working with the switch being towards the cable. And yes, ignition was on.

[jpl250rs]

you have compatible elm on lonelec, bmdiag , obdauto websites