Page 2 of 2
Re: Received Licenc but not recognising it.
Posted: Mon Feb 16, 2026 7:52 pm
by jpl250rs
nice so this is an m3c on your bike.
you shall keep this setting everytime you connect
yes you already got a licence with m3c setting , i re init it , you can try again
Re: Received Licenc but not recognising it.
Posted: Mon Feb 16, 2026 9:13 pm
by geoffstovold
Thanks
I have tried to get a licence again but it is still saying ECU already registered..
I assume that this is what I am supposed to do, get another licence?
Geoff
Re: Received Licenc but not recognising it.
Posted: Mon Feb 16, 2026 9:23 pm
by geoffstovold
Or should I be downloading the software again and starting completely from scratch.? I am unclear on what exactly I am supposed to do. I can't seem to get another licence.
Re: Received Licenc but not recognising it.
Posted: Mon Feb 16, 2026 9:30 pm
by jpl250rs
can you try again ?
Re: Received Licenc but not recognising it.
Posted: Tue Feb 17, 2026 11:19 am
by geoffstovold
Eureka! I have made it work.
I have realised that the licence needs to match the Any bike/M3C selection made for it to work properly and that I did in fact have a licence for both selections so all I needed to do was was use the correct licence with the M3C setting.
A suggestion for improvement:
Instead of 'Any Bike' and the M3C selection. Any bike is not any bike it is some bikes. And most Scrambler owners will not have a clue that they have an M3C ECU. Why not have a model dropdown list so that the user just selects his Ducati model and the the software makes the ECU selection choice? Ideally there should be no default so that they user has to make a positive selection.
Thank you for your help
Geoff