Jpdiag

Buenas tardes a todos, espero que esteis muy bien !

Acabo de aforarme en este forum tan interesante ya que, como mucho de vosotros, necesitais soporte. En mi caso abriré un hilo para ver quien puede ayudarme con respecto al cable de 4 pines al OBD2 (una recomendación de un cable fiable).

Un saludo y rafagas!!!

welcome

check obdauto , lonelec, bmdiag ,they all have compatibles cables

So ELM 1.4 isn't suitable? It's the one I use, and I can actually connect to the bike but can't perform the resets... Should I buy another one?

1.4 shall be ok , you can post the debug report to see where the problem comes from

Hi JP, I'm not sure if you remember me from the other forum. You and I have already run a lot of tests and found nothing. I'll send you the debug report with the latest software version. Maybe you'll see something new.
As always, thank you very much.