Jpdiag

Hi JP,

I'm having trouble resetting the desmo indicator on my 2013 MTS 1200. The garage who performed the desmo service was also unable to reset it (, so I am trying myself with your Melcodiag tool.

I can read the VIN and see data from the bike (temperatures etc)., but when I hit Desmo reset nothing happens. Is there anything I should try? My debug log is below.

Many thanks in advance

"File generated On 04/06/2025 19:57:34"
"Software version 2.0.4.4"
"ELM version : ELM327 v2.1"

"Auto Detect Bike = MTS1200S"
"User Bike = 2013"

"CAN Bike = "
"Ecu = "
"Hardw = "
"Softw = 5"
"OilService = NO"
"DesmoService = YES"
"DesmoService = NO"

" vin 145A8F035A444D4133303041414442303036333730

10 PIDS active founds

230_0000000000080000
018_0000120000000007
080_04000500000000C8
022_0000000000000000
190_4800787B00FFFC5C
024_09A27FC900000000
020_07000048E2010000
110_A0325A0440000E10
100_230428397E3BDC00
150_00480048494903FF
"
"Vin = ZDMA300AADB006370"
"DTC = "
"221D0187"
"Bike = 1"
"lic found
lic is valid
ZDMA300AADB006370
"
"registered"

all seems ok
if possible that would be nice i remote your pc for trying different commands

Hi JP,

Sure, happy to try a remote session - can you let me know when suits you best? I'll send you a PM

Many thanks!

Hi JP,

Are you still open to giving this a go via a remote session? I saw previously that you used RustDesk which I've downloaded. Happy to do anytime that suits you!

let me know your possible schedules gmt +2 time i'll try to match one of yours