Page 1 of 2
2021 Desert Sled issues
Posted: Thu Jun 12, 2025 6:52 am
by Mr Fox
I've been trying to reset my annual service on the sled as well as the desmo (although the light is not yet popped up, but i've done the job so).
I am using
https://www.lonelec.com/product/obd2-wi ... ader-v1-5/ and am able to connect to it via Melcodiag. I am not able to pull a report to get a license with "M3C" ticked, only with "Any bike" selected, sent that and received the license yesterday. Tried resetting but it does not work.
I can connect and read the VIN and it is correct but it does not seem to provide proper "ECU Type" or "Hardware version" with "Any bike" ticked
I had one session where it connected with M3C and read "CAN ERROR" ECU type, VIN and so on.
Any idea of what could be wrong?
And sorry JP! I sent an email before reading that this should be way of communications.
Re: 2021 Desert Sled issues
Posted: Thu Jun 12, 2025 7:57 pm
by jpl250rs
can you post the report with each of selected mode ?
Re: 2021 Desert Sled issues
Posted: Thu Jun 12, 2025 8:57 pm
by Mr Fox
Any bike:
"File generated On 2025-06-12 22:57:31"
"Software version 2.0.4.4"
"ELM version : ELM327 v1.5"
"Auto Detect Bike = Ducati Scrambler Desert Sled 2021 EU5"
"User Bike = 2021"
"CAN Bike = "
"Ecu = "
"Hardw = """
"Softw = 22000000"
"OilService = YES"
"DesmoService = NO"
" vin DATA
vin DATA
vin 7F1A11CCCCCCCC
vin 7F1A22
vin 31A8F03145A8F035A444D354B303041414D42303030383033
12 PIDS active founds
020_004000100000072C
02A_000180000000073C
174_0080005B496B0C53
178_0480000037690C74
17C_0080010019800C0E
024_0000000000060398
188_7FFF7FA780C34129
022_000000000003F1BC
18C_800380020000025F
023_000000547F430118
080_2BC2BC1F00000388
100_C802000FFF0012BA
"
"Vin = ZDM5K00AAMB000803"
"DTC = "
"C6F341C2"
"Bike = 3"
"lic found
ZDM5K00AAMB000803
hard :
soft :
ZDM5K00AAMB000803
"
"registered"
And M3C:
"File generated On 2025-06-12 22:56:32"
"Software version 2.0.4.4"
"ELM version : ELM327 v1.5"
"Auto Detect Bike = "
"User Bike = 2021"
"CAN Bike = "
"Ecu = "
"Hardw = "
"Softw = "
"OilService = YES"
"DesmoService = NO"
" vin:NO DATA>
14 PIDS active founds
020_0040001000000ED9
02A_0001800000000EC9
080_2BC2BC1F00000B60
100_C802000FFF001A52
188_80037FA380C3471F
022_000000000003F7F2
18C_800380020000088D
023_000000547F47077B
174_FE7F005A306B0551
178_0C80082D226905B0
17C_00800100138005F4
300_3B8000080B02CF43
230_0000100000000F5F
220_0000000000000FB1
"
"Vin = "
"DTC = "
"C6F341C2"
"Bike = 4"
"lic found
ZDM5K00AAMB000803
hard :
soft :
"
"registered"
Re: 2021 Desert Sled issues
Posted: Fri Jun 13, 2025 4:38 pm
by jpl250rs
i'mnot sure your bike has a continental ecu M3C , can you confirm it ?
else for the light reset you may need to wait the light comes up
Re: 2021 Desert Sled issues
Posted: Fri Jun 13, 2025 7:48 pm
by Mr Fox
So from your side it is looking ok?
The yearly service is showing up, but I can not remove it.
Image below shows picture of the ECU, not sure if that helps?
https://share.icloud.com/photos/0d6r6K_ ... zJBgS5VGBQ
Re: 2021 Desert Sled issues
Posted: Sat Jun 14, 2025 8:34 pm
by jpl250rs
yes all looks ok
it's not a m3c but i don't know the made
Re: 2021 Desert Sled issues
Posted: Sun Jun 15, 2025 4:47 am
by Mr Fox
Glad to know I’ve done it correct at least! So that means I can not reset the service light, or should ”any bike” work?
Re: 2021 Desert Sled issues
Posted: Sun Jun 15, 2025 6:16 pm
by jpl250rs
i think any bike is the right option.
we can try different settings / resets by changing the bike model manually
i'm sending you some instructions
Re: 2021 Desert Sled issues
Posted: Sun Jun 15, 2025 9:25 pm
by Mr Fox
Awesome, thanks! I’ll try it as soon as I can
Re: 2021 Desert Sled issues
Posted: Sun Jun 22, 2025 5:12 pm
by Mr Fox
I’ve tried all the bike models but no luck. And it is “service intervaI” I should reset, right?
can see the OBD reader sending/receiving but nothing. Is there any indication from Melco when it should be a success?
Could the issue be that I did not tick “oil service active” when I requested the license?