Jpdiag

Hi all,

I have more or less connected my MTS 2016 to Melcodiag using a v1.4 OBDII USB reader with the PIC18F25K80chip - I can read a few parameters although they are funny like rpm reading when engine not running or the mileage which is not the real one

Nevertheless, I think my melcodiag license is recognised but I can not reset the oil service light, nor access the tests.

I am running windows 11 on a Surface tablet with only USB-C ports - I have to use an adapter - Could it possibly be a source of worries ?

I will post the debug file in the next message - Any help or suggestions are welcome

Here is the picture :

"File generated On 9/7/2025 2:55:15 PM"
"Software version 2.0.4.8"
"ELM version : ELM327 v1.4"

"Auto Detect Bike = MTS1200"
"User Bike = MTS 1200 2016"

"CAN Bike = "
"Ecu = "
"Hardw = "
"Softw = 10SW037916U"
"OilService = YES"
"DesmoService = NO"

" vin 145A8F035A444D4141303041414742303037393337
vin 7F1A1255555555
vin 7F1A1255555555
vin 0C5A953130535730333739313655

13 PIDS active founds

022_000000000003F0A1
023_000000FC808F00BC
188_7FF37C4F7F4B406F
020_0000B90000008207
018_0002A000A4005276
019_96096000000003F4
174_11800000866908EA
178_FD7F00006A78082A
17C_0000000072930800
024_0000000000000D8B
080_18E0000050000D40
100_C71202B02B000DDC
130_0000050003E60E
"
"Vin = ZDMAA00AAGB007937"
"DTC = "
"D032F4D8"
"Bike = 2"
"lic found
lic is valid
ZDMAA00AAGB007937
"
"registered"

10sw software are still a pain to delete service , i've no solution for this version yet

Thank you JP for your reply