Page 1 of 1

MTS 1260 Coms issue

Posted: Thu Sep 25, 2025 5:21 pm
by aVeryModernDinosaur
I've got the bike to talk to the lap top and asked it for a report and this is what it throws up:

"File generated On 25/09/2025 18:04:33"
"Software version 2.0.4.6"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = MTS 1260"
"User Bike = MTS 1260 2018"

"CAN Bike = "
"Ecu = "
"Hardw = "
"Softw = "
"OilService = NO"
"DesmoService = YES"

" vin 145A8F035A444D4143303041414B42303037313632
vin 7F1A22
vin 7F1A22
vin 7F1A22

12 PIDS active founds

174_00800000C66A0A80
178_2A800E077E7F0A54
018_0002A000850049CB
019_9609600000000A01
022_000000000003F7F2
023_000000FC7F930722
17C_00000000D0950A7C
188_7FEF7FCB806747EE
024_00000000000009FF
080_1AF2BCC03020095C
020_00009B000000401D
100_C7120400410009CC
"
"Vin = ZDMAC00AAKB007162"
"DTC = "
"D22DF08C"
"Bike = 2"
"lic not found
ZDMAC00AAKB007162
CAN ERROR
ZDMAC00AAKB007162
ZDMAC00AAKB007162
"
"not registered"


any help much appreciated

Re: MTS 1260 Coms issue

Posted: Thu Sep 25, 2025 5:50 pm
by jpl250rs
you can re download melcodiag and try with the 2.0.4.8 version

Re: MTS 1260 Coms issue

Posted: Thu Sep 25, 2025 6:20 pm
by aVeryModernDinosaur
Hi thanks for the help , I've deleted the old version and installed the 2.0.4.8 update , but still no luck. latest debug report is as follows thanks:
"File generated On 25/09/2025 19:16:14"
"Software version 2.0.4.8"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = MTS 1260"
"User Bike = MTS 1260"

"CAN Bike = "
"Ecu = 286.4.279.1CUUUUU"
"Hardw = "
"Softw = 10SW046861U"
"OilService = NO"
"DesmoService = YES"

" vin 145A8F035A444D4143303041414B42303037313632
vin 0E5A883238362E342E3237392E3143555555555555
vin 7F1A1255555555
vin 0C5A953130535730343638363155

13 PIDS active founds

587_41FE0A00AAAAAAAA
174_E47F0000BC6A0EC3
178_06800512867F0E4F
17C_0000000095950EE1
022_000000000003F6EF
023_000000FC7FAB06A4
188_7FEF7FCF806B46CA
020_00009B000000433A
024_000000000000000A
080_1AE2BCC0302000BD
100_C712040041000039
018_0002A0008500476D
019_9609600000000780

15 PIDS active founds

174_F27F0000AE6A0C88
178_0E8008237E7F0C79
17C_00000000BE950C6B
022_000000000003F4D5
023_000000FC7F930405
110_5010431001CC6DB3
188_80077FCF806744A0
024_0000000000000EAC
080_1AE2BCC030200E1B
100_C712040041000E9F
018_0002A00085004557
019_96096000000005BA
020_00009B0000004227
220_0000000000000117
607_01FE0A0155
"
"Vin = ZDMAC00AAKB007162"
"DTC = "
"D22DF08C"
"Bike = 2"
"lic not found
ZDMAC00AAKB007162
"
"not registered"

Re: MTS 1260 Coms issue

Posted: Thu Sep 25, 2025 8:16 pm
by jpl250rs
all looks good , you cna now press get licence button

Re: MTS 1260 Coms issue

Posted: Fri Sep 26, 2025 11:22 am
by aVeryModernDinosaur
Still not getting anywhere, it still says Error: Missing some information, licence cannot be generated.
latest log below
"File generated On 26/09/2025 12:19:06"
"Software version 2.0.4.8"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = MTS 1260"
"User Bike = MTS1260"

"CAN Bike = "
"Ecu = 286.4.279.1CUUUUU"
"Hardw = "
"Softw = 10SW046861U"
"OilService = NO"
"DesmoService = YES"

" vin 145A8F035A444D4143303041414B42303037313632
vin 0E5A883238362E342E3237392E3143555555555555
vin 7F1A1255555555
vin 0C5A953130535730343638363155

12 PIDS active founds

020_00009B0000004653
018_0002A000850049CB
019_9609600000000A01
174_E47F0000B06A0FD4
178_0B800321807F0F05
17C_00000000D7950F9F
024_000000000000032D
080_1A32BCC03020037E
100_C71204004100031E
022_000000000003F7F2
023_000000FC7F97070F
188_7FF77FCB805F476B
"
"Vin = ZDMAC00AAKB007162"
"DTC = "
"D22DF08C"
"Bike = 2"
"lic not found
ZDMAC00AAKB007162
"
"not registered"

thanks

EDIT* just tried putting no bike data in the first line as I had a browse through similar problems, and it's now come up with ;Your ECU / serial number appears to be already registered in our database.

*

Re: MTS 1260 Coms issue

Posted: Fri Sep 26, 2025 12:28 pm
by aVeryModernDinosaur
Ok, So I've managed to get a licence and downloaded it into the MelcoDiag folder, but now when i connect I cant actually do anything with the app, it won't let me read codes , reset service lights, it doesn't even do basic stuff like check side stand position.
Debug says that there is a licence present, but the only thing that will even highlight when i cover with a mouse are gear reset and key reset.

"File generated On 26/09/2025 13:22:43"
"Software version 2.0.4.8"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = MTS 1260"
"User Bike = MTS 1260"

"CAN Bike = "
"Ecu = 286.4.279.1CUUUUU"
"Hardw = "
"Softw = 10SW046861U"
"OilService = NO"
"DesmoService = NO"

" vin 145A8F035A444D4143303041414B42303037313632
vin 0E5A883238362E342E3237392E3143555555555555
vin 7F1A1255555555
vin 0C5A953130535730343638363155

13 PIDS active founds

018_0002A00085004E98
019_9609600000000E75
174_EA7F0000C36A01B7
178_0B800125887F0135
17C_00000000C29501A8
024_0000000000200DFE
080_1AF2BCC030200D28
100_C712040041000DB8
020_00009B0000004FA6
022_000000000003FF1A
023_000000FC7F970FE7
188_7FEF7FCB80634F2B
130_0000050003E60A00
"
"Vin = ZDMAC00AAKB007162"
"DTC = "
"D22DF08C"
"Bike = 2"
"lic found

ZDMAC00AAKB007162
"
"not registered"