Jpdiag

The bike is showing connected in the software and when I attempt to use the service buttons, the OBDII lights up but the bike doesn't show any changes to the oil service or the annual service. I pulled the positive off the battery to reset and still nothing. Below is the debug data. Any input would be appreciated. I also noticed that the debug data is showing the bike as a 2022 but it's a 2023.
"File generated On 11/16/2025 9:36:41 AM"
"Software version 2.0.4.8"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = Multistrada v4 2022"
"User Bike = 2023 multistrada v4s"

"CAN Bike = "
"Ecu = ÌÌÌÌ"
"Hardw = ÌÌÌ"
"Softw = 11CCCCCC"
"OilService = YES"
"DesmoService = NO"

" vin 145A8F035A444D41414C5657375042303134343831

13 PIDS active founds

018_0002A000820041A9
019_96096000000001CE
020_004095106C0049D1
130_0000040100000771
080_1C5226C025000078
100_C8022B42B5000F4A
022_000000000003FE07
023_000000FC7FEF0E8B
024_0000000000000117
084_1C52261226005F32
184_7D038F6B00000E2F
188_7FFF7CD3801B4E54
18C_8003800380070E67
"
"Vin = ZDMAALVW7PB014481"
"DTC = "
"E057E43F"
"Bike = 8"
"lic found
lic is valid
ZDMAALVW7PB014481
lic is valid
ZDMAALVW7PB014481
***reset annual***
021001
065001006400C300
023E00
027E000000000000

>023E00
027E000000000000
service date : 251116

>031A9100
037F1A1100000000

>031A9300
037F1A1100000000
***reset annual***
021001
065001006400C300

>023E00
027E000000000000

>023E00
027E000000000000
service date : 251116
031A9100
037F1A1100000000
031A9300
037F1A1100000000
***reset annual***
021001
065001006400C300
023E00
027E000000000000
023E00
027E000000000000
service date : 251116
031A9100
037F1A1100000000
031A9300
037F1A1100000000
"
"registered"

all looks good.

i reupload melcodiag and try to send multiple commands and adding some delay , you can give it a try

I have the same bike... 2023 showing as 2022. I got a license generated. The Reset buttons are all gray'ed out so they won't click Almost as if I had no license... Any ideas?

Thanks!
Richard.

post your report

This was in preparation for a sale and I just sold it! The buyer didn't care...

I redownloaded Melcodiag and slowly clicked between the service buttons. It still doesn't seem to reset the light though. Here's the debug log. If there's anything else I can do, please let me know.
"File generated On 11/23/2025 9:00:21 AM"
"Software version 2.0.4.8"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = Multistrada v4 2022"
"User Bike = 2023 multistrada v4s"

"CAN Bike = "
"Ecu = ÌÌÌÌ"
"Hardw = ÌÌÌ"
"Softw = 11CCCCCC"
"OilService = YES"
"DesmoService = NO"

" vin 145A8F035A444D41414C5657375042303134343831

14 PIDS active founds

024_0000000000000644
084_1BF22612260054FB
210_00000057000079E3
020_004095106C004E82
110_503D4310018C6E1F
018_0002A0008200485C
019_960960000000083B
022_000000000003F4D5
023_000000FC7FE3042E
080_1BF226C025000630
100_C8022B52B50005BD
184_7CEF8F63000004EB
188_80037CCB801F4424
18C_801780037FE704FC
"
"Vin = ZDMAALVW7PB014481"
"DTC = "
"E057E43F"
"Bike = 8"
"lic found
lic is valid
ZDMAALVW7PB014481
***reset annual***
021001
065001006400C300
023E00
027E000000000000

>023E00
027E000000000000
service date : 251123

>031A9100
037F1A1100000000

>031A9300
037F1A1100000000
***reset annual***
021001
065001006400C300

>023E00
027E000000000000

>023E00
027E000000000000
service date : 251123
031A9100
037F1A1100000000
031A9300
037F1A1100000000
"
"registered"