MelcoDiag service reset with Ducati Racing / UpMap – Multistrada 1260S & Diavel 1260S
Posted: Sun Mar 08, 2026 3:46 pm
Hello everyone,
I have two Ducati motorcycles and I’m starting to think about doing the servicing myself. Recently I have a bit more free time and would like to take care of maintenance on my own.
The first bike is a Ducati Multistrada 1260S, which I bought new in 2018. It has a Termignoni exhaust with full Decat and a Ducati Racing map, originally installed using the official Ducati USB dongle (which I still have).
The second bike is a Ducati Diavel 1260S from 2021, the last production version of this model, in graphite black with yellow accents. This bike also has a full Decat and titanium Termignoni exhaust. The Ducati Racing map was installed during the exhaust installation, but in this case it was done remotely without a USB dongle.
On both motorcycles, when the ignition is turned on, the Ducati Racing logo appears on the display.
I would like to start doing my own servicing and after completing the maintenance reset the service interval using MelcoDiag.
My question for those who already have experience with this:
Has anyone here reset the service on Ducati motorcycles that have a Ducati Racing / UpMap installed?
The software shows a warning that it may not work with an UpMap.
Is this actually a problem or does it work normally?
Is there any specific procedure if the motorcycle has a Ducati Racing / UpMap installed?
One more question.
Can anyone recommend a reliable shop where I can buy diagnostic cables for Ducati (MelcoDiag / JPDiag)? Preferably within Europe but outside the UK, so the delivery is faster.
I would really appreciate any advice.
I have two Ducati motorcycles and I’m starting to think about doing the servicing myself. Recently I have a bit more free time and would like to take care of maintenance on my own.
The first bike is a Ducati Multistrada 1260S, which I bought new in 2018. It has a Termignoni exhaust with full Decat and a Ducati Racing map, originally installed using the official Ducati USB dongle (which I still have).
The second bike is a Ducati Diavel 1260S from 2021, the last production version of this model, in graphite black with yellow accents. This bike also has a full Decat and titanium Termignoni exhaust. The Ducati Racing map was installed during the exhaust installation, but in this case it was done remotely without a USB dongle.
On both motorcycles, when the ignition is turned on, the Ducati Racing logo appears on the display.
I would like to start doing my own servicing and after completing the maintenance reset the service interval using MelcoDiag.
My question for those who already have experience with this:
Has anyone here reset the service on Ducati motorcycles that have a Ducati Racing / UpMap installed?
The software shows a warning that it may not work with an UpMap.
Is this actually a problem or does it work normally?
Is there any specific procedure if the motorcycle has a Ducati Racing / UpMap installed?
One more question.
Can anyone recommend a reliable shop where I can buy diagnostic cables for Ducati (MelcoDiag / JPDiag)? Preferably within Europe but outside the UK, so the delivery is faster.
I would really appreciate any advice.