Jpdiag

I using a CH340 interface with original driver installed.

During the connection phase, SW v5 fails to connect to the motorcycle. I generated a report.

I tried SW v4.9, and it seems to work better (although the data is incomplete and the tool doesn't fully function).

v4.9
"File generated On 09/04/2026 17:16:12"
"Software version 2.0.4.9"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = "
"User Bike = Multistrada 1200S ABS MY2015"

"CAN Bike = "
"Ecu = "
"Hardw = "
"Softw = "
"OilService = NO"
"DesmoService = NO"

" vin 145A8F035A444D4141303041414642303030323632
vin 7F1A1255555555
vin 7F1A1255555555
vin 0C5A953130535730333739313655

13 PIDS active founds

188_80037FE380F74440
174_4E800000396B0827
178_00800000C58008A2
17C_000000003A96080D
024_0000000000200AAD
080_18C0000030000A6B
100_C712038033000A9E
018_0002A00082004D35
019_9609600000000D52
022_000000000003F5C8
023_000000FC7F1705FC
020_0000950000004562
300_38980000260B49ED
"
"Vin = "
"DTC = "
"C81140E9"
"Bike = 2"
"lic found
lic is valid
ZDMAA00AAFB000262
"
"not registered"

v5
"File generated On 09/04/2026 17:22:52"
"Software version 2.0.5.0"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = "
"User Bike = Multistrada 1200S ABS MY2015"

"CAN Bike = "
"Ecu = N/A"
"Hardw = N/A"
"Softw = N/A"
"OilService = NO"
"DesmoService = NO"

"
0 PIDS active founds

"
"Vin = "
"DTC = "
"C81140E9"
"Bike = 1"
"lic not found
VIN via OBD2/0902: ZDMAA00AAFB000262
"
"not registered"

ok,thanks for report , i'm back to 2.0.4.9 untill i found the issue