Jpdiag

Hi, i were trying to reset my service interval on M696 ABS 2010, but when i\m clicking reset button, light on ob2 cabel is flashing, but service icon doesn't dissappear. I am using elm 327 1.5, ft232rl chip. im already tried different drivers for cabel, different programms (melcodiag, m3c9, jpdiag doesnt work), diff com port and com speed. Here is my report

"File generated On 07.05.2026 20:26:54"
"Software version 2.0.4.9"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = "
"User Bike = M696 ABS 2010"

"CAN Bike = "
"Ecu = S180040130"
"Hardw = QD0A2010"
"Softw = A2IU1NAN"
"OilService = YES"
"DesmoService = YES"

" vin:100E5A8C3239353821373839373720202220AAAAAAAAAAAA

6 PIDS active founds

080_0000000000000000
010_0000000000000000
081_0100000000000000
100_0000000000000001
020_0000004FA1000000
028_0000000000000000
"
"Vin = 295878977 "
"DTC = 055801048200AAAA 100B5803048200D60400D60200AAAA"
"E6B24DCF"
"Bike = 4"
"lic found
295878977hard :QD0A2010
soft :A2IU1NAN
***read annual***
021003
NO DATA

>
031a9200
NO DATA

>
***read annual***
021003
NO DATA

>
031a9200
NO DATA

>
***read annual***
021003
NO DATA

>
031a9200
NO DATA

>
***read annual***
021003
NO DATA

>
031a9200
NO DATA

>
"
"registered"

have you pressed service interval ?

yes, i'm getting N/A on it

that's not service interval button , you are pressing get service date instead

i have clicked on reset service interval, reset desmo, annual service 0, annual service 1, tried to change service data, but nothing works. I have reaction only on reset service interval, my obd cabel starts blinking. Only on service interval

all dll and lic files present in melcodiag directory ?
Msdll.dll , EnDtcM.dll and cle.lic

yep, I tried to reinstall software, but same problem happend
I recorded video of my try to resetting service interval
https://youtube.com/shorts/RiC1W5xoj2k? ... 1FkigkSRZC

yes all is fine.
have you tried with m3c9 software ?

Yes, same thing. only after some time the values ​​show incorrectly (-40° air temperature, 4.0v battery voltage, etc.)

would it be possible to remote your pc with rustdesk ?