Jpdiag

Hello,

I have several motorcycles in my fleet, including a Panigale 1199 and a Diavel 1200, which I maintain and diagnose using MelcoDiag - great tool by the way
I got licenses for both motorcycles; however, I can no longer access MelcoDiag with the license for the Diavel.

I have already tried several possible solutions, including:

- using two separate MelcoDiag directories on my laptop, each containing the corresponding license file for the respective motorcycle,
- swapping the license files within the MelcoDiag directory.

Unfortunately, the software always recognizes only the Panigale 1199 license.

Is there perhaps a specific workaround or trick that allows me to manage and diagnose two motorcycles with one laptop?

Thank you very much in advance for your support!
Sven

we can combine the 2 licences in one single . there could be only one cle.lic , send me the 2 vin , i'll issue one single file

Thank you for the prompt response.

The VIN for the Panigale can be provided. Unfortunately, no VIN is shown in the diagnostic protocol for the Diavel — it is a 2011 model year.

Would there still be a possibility to obtain a shared/common license covering both motorcycles?
And which information is required?

Thank you in advance for your support.

yes it can works for the 2

i need a debug report issued with the 2 bikes then i'll do it
also test the the beta of the 2.0.5.0 and tell me if the vin of the diavel can be found , check the link in your pm

Hello,

Thank you for the beta version.
I tried using it to read the Diavels VIN, but unfortunately without success — neither with model year 2011 nor 2012.
Debug report could not be generated (installation folder is empty) - the last debug report (2.0.4.9) is used

Please find the two debug reports attached.

Thank you!

___________________________________________________________________________________________________________________________

jpl250rs wrote: Thu May 14, 2026 10:50 am yes it can works for the 2

i need a debug report issued with the 2 bikes then i'll do it
also test the the beta of the 2.0.5.0 and tell me if the vin of the diavel can be found , check the link in your pm

Hi,
it works very well, thank you for your outstanding support!