Jpdiag

Hi!

I'm having problems to connect my Multistrada 1260 from 2019 to melcodiag.

I've tried both a wireless ELM327 and a USB version. It seems to find the ELM but cannot connect to the bike or read the VIN.
COM port seems to be ok, and i've tried all availabele connection rates.
The cable i'm using seems to be correct, i've checked the pinout / voltages on the OBD connector.
And i'm using latest version melcodiag (2.0.5.0)

Any ideas?

Thanks in advance!
Maarten

Update, i get the impression that maybe both ELM connectors are not great, so i've ordered a OBDLink LX just to be sure. Other users seem to get good results with this.

See log below:

"File generated On 4-6-2026 14:12:35"
"Software version 2.0.5.0"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = "
"User Bike = MTS1260 2019"

"CAN Bike = "
"Ecu = N/A"
"Hardw = N/A"
"Softw = N/A"
"OilService = NO"
"DesmoService = NO"

"
1 PIDS active founds

?_
"
"Vin = "
"DTC = "
"9CB1F1B3"
"Bike = 6"
"lic not found
PaniVIN:
MultiVIN:
M3dVin:
DashVin2:
DashVin:
EcuVin:
"
"not registered"

elm v1.5 is maybe your issue
are you switching on ignition ?

Yes ignition is on.

Will wait for the OBDLink adapter to arrive and try again

Now with OBDLink LX no issues, bike is connecting and i've requested de license!

So many bad adaptors on the market...

Licence received, service reset done! Donation made

Great! Thank you!

thanks for the report and donation.