Jpdiag

Hello,
I'm using for 1st time Melcodiag in order to reset the service light on my Hypermotard 950 2019.
But after connecting the ELM and wire to the bike (with key on), Ecu Type and VIN/Serial fill empty.*N/A
A2C9

QD1E
300_?
18_
80_
100_
Global_1 PIDS active founds
OIL0_DES0

Does such bike is supported by that tool ? or do I missed any step ?

Here is the debug report ...
"File generated On 04/07/2026 08:16:56"
"Software version 2.0.5.1"
"ELM version : ELM327 v2.1"

"Auto Detect Bike = "
"User Bike = hypermotard2019"

"CAN Bike = "
"Ecu = N/A"
"Hardw = A2C9"
"Softw = QD1E"
"OilService = NO"
"DesmoService = NO"

"
1 PIDS active founds

"
"Vin = "
"DTC = "
"C619BE5A"
"Bike = 7"
"lic not found
PaniVIN:
MultiVIN:
M3dVin:
DashVin2:
DashVin:
EcuVin:
? outp='ZDM'
? outp='ZDM'
? outp='ZDM'
? outp='ZDM'
? outp='ZDMB'
? outp='ZDM'
PaniVIN: ZDM
MultiVIN:
? outp='ZDMB'
M3dVin: ZDMB
DashVin2:
DashVin:
EcuVin:
? outp=''
? outp='A2C9'
"
"not registered"

it looks like your elm is not supported.
prefer a v1.4 that will have more features