Jpdiag

Hi, I have a problem reading the VIN number. I’m using an ELM327 FTDI232 interface with a PIC18F25K80 chip. When I try to connect, a window pops up asking about the 2011 or 2012 model. When I choose 2012, it connects and reads the ECU, hardware, and software, but doesn’t read the VIN number. I can read some information, like mileage, voltage, etc. However, a large part of the information is inactive. I’m mostly interested in the TPS and MAP.

"File generated On 06.08.2026 21:39:45"
"Software version 2.0.5.2"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = "
"User Bike = 2012"

"CAN Bike = "
"Ecu = MELCO HIMEJI"
"Hardw = J001"
"Softw = 00000007"
"OilService = NO"
"DesmoService = NO"

"
5 PIDS active founds

080_06000000C8000006
020_0000005528F00000
018_000042001000295D
200_0000000000000000
110_A02C5A0440000E20
"
"Vin = "
"DTC = "
"0A6FCE2F"
"Bike = 7"
"lic found
PaniVIN:
MultiVIN:
M3dVin:
DashVin2:
DashVin:
EcuVin:
? outp='MELCO HIMEJI'
? outp='J001'
"
"not registered"

nothing wrong , i'mnot able to catch vin on those models .
but the functions you need shall works once you are regisrtered

I downloaded the license file earlier and uploaded it to the folder. The 'Get licence' button disappeared. I didn't notice that in the report it still shows as 'not registered'. What could be the reason for this?

you still using the same computer you used for registration ?
you don't have the popup for choosing the MFD of the bike ?

I registered this ECU on a different computer two years ago. I don't recall the details, but I think that license didn't work quite right either. A week ago, I managed to download the license again onto a new computer. Yes, a window for selecting the model year pops up during the connection process.

Any suggestions as to why it's finding licenses but still showing as unregistered? I'm sure it's something simple, but I'm out of ideas.

You need to register it from the computer you will use it

I am currently using the computer from which I generated the license file about two weeks ago. I previously mentioned generating licenses on a different computer two years ago, but the system has now allowed me to generate a new license on the current machine.

so it's fixed ?

No, the reports still show it as unregistered (new license file, new computer).