Jpdiag

Hi
When I turn my ignition on I get SERVICE DATE flashing. I have serviced the bike, and using MELCOdiag I dont seem to be able to input a new date, in fact the Service buttons when pressed go a very light blue and after a second or so i get a beep from laptop. The box below Service Dates shows N/A


I also noted it doesn't seem to be reading all my data correctly like on initial page it shows 4757KM when I've done over 11,000 Miles and the Revs never populate. I can simulate Revs to 5000 and Speed to 50 in Active tests

Please help...
Big thanks in advance
Nat

is it a 10sw software ?
please post the debug report

have you tried this trick ? viewtopic.php?p=3540#p3540

I'll post debug shortly, the link you show is for a 950S with colour tft display. My model is a standard 950 with LCD display.

"File generated On 19/09/2026 16:21:15"
"Software version 2.0.5.4"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = MTS950"
"User Bike = MTS950/2019"

"CAN Bike = "
"Ecu = 286.4.257.1C"
"Hardw = "
"Softw = 10SW018073"
"OilService = YES"
"DesmoService = YES"
"DesmoService = NO"

"
9 PIDS active founds

020_00409000000042BE
024_0001000000000602
080_1FD2BC003000062F
100_C71200000000062D
018_0002A00080004E11
019_9609600000000E75
188_8001800180010D5E
022_000000000003FD20
023_0000005480010DF8
"
"Vin = ZDMAA05AAJB030560"
"DTC = "
"A23897CA"
"Bike = 3"
"lic found
? outp='ZDMAA05AAJB030560'
PaniVIN: ZDMAA05AAJB030560
lic is valid
? outp='286.4.257.1C'
? outp='10SW018073'
***reset date interval***
service date : 260919
***reset date interval***
service date : 260919
***read annual***
021003
0250033300980036

>
031a9200
037F1A2200980036

>
"
"registered"