Jpdiag

Thanks for your help! I got it working.

The problem was that I used the wrong port on my bike. This port however had the right pinout to power the OBD adapter with 12V, which probably caused the effect I had.

Using the 3-pin adapter, everything works now

I contacted lonelec today. Turns out the connector I’ve been trying to use only workss for data logging, despite being the same connector used on other Ducatis for OBD… The 848 has a 3 Pin connector, which means I need a different adapter and new OBD tool.

Tried again with 38400bds but still no success.

Thats the OBD interface I am using: https://www.lonelec.com/product/zoobek-pc2-compact-elm327-fault-code-and-data-reader/
Looks like its a Winchiphead chipset as it shows a red led when connected via USB

Together with this 4-Pin adapter: https://www ...

Hey everyone,

I'm trying to reset the service light on my Streetfighter 848. It has an IAW5 ECU, and I'm using JPDiag.
I'm using the same setup I used a few years ago on my Hypermotard 796: an ELM327 interface with an adapter cable that worked fine back then.

The issue:

Ignition is on
correct ...

Hey, I used JPDiag a few years ago with my Hypermotard and now need it again for my Streetfighter 848. I used to be on the old forum that seems to be not available anymore...?

Anyway, I am thankful for the program and the community and already have a few questions that I will post in a separate ...