2016 MTS 1200 DVT

For bikes using the can line usually from 2010 and up
works with elm cables only
Forum rules
Do not send PM , if your can't find your problm , please open a new thread with your bike and issue
Post Reply
Greefy67
Posts: 7
Joined: Sat Feb 21, 2026 8:56 pm

Re: 2016 MTS 1200 DVT

Post by Greefy67 »

Should I try a different software?
Top
ran-ran
Posts: 2
Joined: Wed Mar 04, 2026 4:30 pm

Re: 2016 MTS 1200 DVT

Post by ran-ran »

Hi there,

I have the same issue on my 2015 DVT, it also has the 10S software (the software on the bike).

One thing I have noticed, if you change the date on the bike, then run the Melco (2.0.4.9) and select get service date then it returns the date you have set on the bike - not sure if its getting todays date rather than the service reset date. Not sure if this might help?

Cheers,

Rich
Top
Ltwin821
Posts: 4
Joined: Sat Jul 26, 2025 1:53 am

Re: 2016 MTS 1200 DVT

Post by Ltwin821 »

As the software doesn't work on my MTS. Ive resorted to changing the date on mine to remove the service light. You need to take the date back to when it was last reset.
Top
jpl250rs
Site Admin
Posts: 945
Joined: Sat Jan 11, 2025 2:36 pm

Re: 2016 MTS 1200 DVT

Post by jpl250rs »

:idea: good tips for others
Top
ran-ran
Posts: 2
Joined: Wed Mar 04, 2026 4:30 pm

Re: 2016 MTS 1200 DVT

Post by ran-ran »

Ltwin821 wrote: Wed Mar 04, 2026 5:22 pm As the software doesn't work on my MTS. Ive resorted to changing the date on mine to remove the service light. You need to take the date back to when it was last reset.
:D Thats exactly what I ended up doing with mine!
Top
Post Reply

Return to “Melcodiag”