HI JP Hope all is well with you! so I recently bought this 2018 Ducati Scrambler 1100 use from the dealership and was doing the oil change myself when I tried to reset the service with melcodiag and registered the bike it keeps giving me an error says missing information. Anyhow I was going through the debug report and it say's bike is registered lic not found so I'm guessing the previous owner already registered this bike before. Is there anyway i can get a new license? Thank you very much! attached here is the debug report.
"File generated On 3/25/2026 9:16:02 AM"
"Software version 2.0.4.9"
"ELM version : ELM327 v1.5"
"Auto Detect Bike = "
"User Bike = ducati scrambler 1100 2018"
"CAN Bike = "
"Ecu = "
"Hardw = "
"Softw = "
"OilService = NO"
"DesmoService = NO"
" vin:NO DATA>
12 PIDS active founds
188_7FFF7BFB80634537
022_000000000003F5C8
023_000000547F83054F
100_C8121180000006C0
018_0003A00040C04ED4
019_9609600000000F68
174_0680000061930C93
178_E77F0528B9870CF3
17C_00000000A5960C27
020_0040500000004DB9
024_0000000000000759
080_1F21F203252007E3
"
"Vin = "
"DTC = "
"8C4E81A4"
"Bike = 4"
"lic not found
ZDMKAFCP2JB000531
hard :
soft :
hard :
soft :
"
"registered"
License
Forum rules
Do not send PM , if your can't find your problm , please open a new thread with your bike and issue
Do not send PM , if your can't find your problm , please open a new thread with your bike and issue
Re: License
are you ticking m3c setting before pressing connect button ?