Ducati Hypostrada 2013 service reset

[Neill]

hi just purchased my bike and want to reset the desmo service the button is active but it does not clear the service from the dash ? note registered the bike and connects fine.

[jpl250rs]

can you post the report ?

[Neill]

keeps saying invalid file extension txt when i try to attach it?

[Neill]

managed to save it in a zip file

[Neill]

File generated On 11/08/2026 10:23:23"
"Software version 2.0.5.1"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = Hyper 821"
"User Bike = 2013"

"CAN Bike = "
"Ecu = N/A"
"Hardw = N/A"
"Softw = N/A"
"OilService = NO"
"DesmoService = NO"

"
10 PIDS active founds

080_0011C410000000C8
024_3CF45AF400000000
018_00004A0000000002
022_0000000000010000
020_0800FF0302003D00
230_0000000000080000
300_C00382005D2D0400
120_7F0B010000000502
200_0000000000000000
160_C8C800006564CC
"
"Vin = ZDMB200AADB005295"
"DTC = "
"5682832F"
"Bike = 3"
"lic found
? outp='ZDMB200AADB005295'
PaniVIN: ZDMB200AADB005295
hard :!©
soft :†
? outp='ZDMB200AADB005295'
PaniVIN: ZDMB200AADB005295
? outp='ZDMB200AADB005295'
PaniVIN: ZDMB200AADB005295
"
"not registered"

[Neill]

File generated On 11/08/2026 10:23:23"
"Software version 2.0.5.1"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = Hyper 821"
"User Bike = 2013"

"CAN Bike = "
"Ecu = N/A"
"Hardw = N/A"
"Softw = N/A"
"OilService = NO"
"DesmoService = NO"

"
10 PIDS active founds

080_0011C410000000C8
024_3CF45AF400000000
018_00004A0000000002
022_0000000000010000
020_0800FF0302003D00
230_0000000000080000
300_C00382005D2D0400
120_7F0B010000000502
200_0000000000000000
160_C8C800006564CC
"
"Vin = ZDMB200AADB005295"
"DTC = "
"5682832F"
"Bike = 3"
"lic found
? outp='ZDMB200AADB005295'
PaniVIN: ZDMB200AADB005295
hard :!©
soft :†
? outp='ZDMB200AADB005295'
PaniVIN: ZDMB200AADB005295
? outp='ZDMB200AADB005295'
PaniVIN: ZDMB200AADB005295
"
"not registered"

[jpl250rs]

the debug report says not registerd .
are you sure you are using the licence file belonging to this bike ?
this elm v1.5 has already worked ?

[Neill]

hi do i need to delete the file for the multistrada i had?

[Neill]

Just regstered again using my wifs e mail and saved the file same problem?

"File generated On 11/08/2026 21:08:47"
"Software version 2.0.5.1"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = Hyper 821"
"User Bike = hypostrada 2013"

"CAN Bike = "
"Ecu = N/A"
"Hardw = N/A"
"Softw = N/A"
"OilService = YES"
"DesmoService = YES"

"
11 PIDS active founds

020_0600FF03B8004000
230_0000000000080000
018_00004A0000000002
300_000382005D2D0400
022_0000000000010000
080_0011C410000000C8
024_80CB878A00000000
190_60E0000000000050
160_C8C800006564CCCC
150_0000545058500006
100_E01228407E40D800
"
"Vin = ZDMB200AADB005295"
"DTC = "
"5682832F"
"Bike = 3"
"lic not found
? outp='ZDMB200AADB005295'
PaniVIN: ZDMB200AADB005295
? outp='ZDMB200AADB005295'
PaniVIN: ZDMB200AADB005295
"
"not registered"

[Neill]

saved the file in the same folder as melcodiag it also does not show any ecu details just the vin?