I have Superpsort 950S, use the Euro 5 to OBD connector with ELM327 v1.5, direct usb cable connection to PC ( Win11 Pro ).
I did not install any drivers, upon connection the adapter show as COM7 under COM device and i use this to COM connect with MelcoDiag.
It connects succesfully but is not reading any data ( Vin, basic engine telemetry data etc ) - the only thing i'm getting is ECU as below when i scan for it (in ANY Bike mode)
and when i want to use the M3C connection i have the OutOfMemory Exception.
REPORT:
"File generated On 01/04/2025 18:03:46"
"Software version 2.0.4.4"
"ELM version : ELM327 v1.5"
"Auto Detect Bike = "
"User Bike = 2024"
"CAN Bike = "
"Ecu = "
"Hardw = "
"Softw = "
"OilService = NO"
"DesmoService = NO"
" vin:NO DATA
>
3 PIDS active founds
?_
*Ecu found on : 7D4 ,7DC*Ecu found on : 7E1 ,7E9*Ecu found on : 7E3 ,7EB"
"Vin = "
"DTC = "
"104DD3B4"
"Bike = 4"
"lic not found
hard :
soft :
hard :
soft :
hard :
soft :
"
"registered"
Any pointers if i do anything wrong here ?