Jpdiag

Posted: **Sun Jun 01, 2025 9:26 pm**

This morning, I connected sixty2 to my computer.

I tried running melcogiag with a new lic file.

The result was the same as before, and desmo reset was not successful.

The only button I could select was (key reset).

I applied again using the blue license button, hoping to find out something.

I will send another debug for reference.

"File generated On 2025/06/02 6:02:58"
"Software version 2.0.4.4"
"ELM version : ELM327 v1.5"

"Auto Detect Bike = Scrambler"
"User Bike = scrambler sixty2 / 2018"

"CAN Bike = "
"Ecu = 5WY8691-AA"
"Hardw = QD0H1010"
"Softw = 1DABAAC1"
"OilService = NO"
"DesmoService = YES"

" vin:100E5A8C3430303021313739373336202220AAAAAAAAAAAA

5 PIDS active founds

081_00000000C8000000
020_52B8C00000000000
022_0000000000000117
100_00000A0000040001
2_
"
"Vin = 4000179736 "
"DTC = "
"C6F1CA69"
"Bike = 5"
"lic found
000179736hard :QD0H1010
scrambler detected
soft :1DABAAC1
"
"not registered"

Posted: **Mon Jun 02, 2025 1:49 pm**

To JPL250RS.
A Japanese Scrambler Sixty2 user reported that he was able to use all the buttons using MelcoDiag.

This was reported on a Japanese blog for the Sixty2.

I was starting to give up, but this gave me courage.
I'll try my best to use MelcoDiag!

We appreciate your continued support.

Posted: **Mon Jun 02, 2025 4:47 pm**

i check carrefully the licence i sent yesterday there is no mistake .
it's no need i send it a 3rd time.
the reason is probably the user system fonts is not an iso font (EU or US) but a japaneese font instead ?

Posted: **Tue Jun 03, 2025 12:24 pm**

Thank you for contacting me.

I would like to change the operating environment from Japanese to English and try running MelcoDiag.

I appreciate your advice!

Posted: **Thu Jun 05, 2025 9:20 am**

I was able to successfully reset the Desmo service.

I did not change Windows to English.

After using the new lic file and repeatedly turning on the key and connecting to MelcoDiag, I was able to select all the tabs.

Thank you for all the advice you gave me!

Posted: **Thu Jun 05, 2025 7:07 pm**

great news !
could be because serial wasn't showing everytime you connect melcodiag ?

Posted: **Fri Jun 06, 2025 3:57 am**

I’ve tried so many things by now that I’m not sure what the actual cause was.
But one thing’s for sure — I successfully reset the Desmo service!

For some reason, I think the VIN wasn’t shown on the MelcoDiag screen when it succeeded.

Jpdiag

I haven't received the license registration email.

Re: I haven't received the license registration email.

Re: I haven't received the license registration email.

Re: I haven't received the license registration email.

Re: I haven't received the license registration email.

Re: I haven't received the license registration email.

Re: I haven't received the license registration email.

Re: I haven't received the license registration email.