Page 4 of 5
Re: Partial data read - only VIN
Posted: Fri Jul 10, 2026 11:47 am
by jpl250rs
Button scan for ecu shall not exist in the new version
Re: Partial data read - only VIN
Posted: Tue Jul 28, 2026 10:53 am
by Teo
Hi! Was on business trip, sorry.
When i connect and press button:
- Scaning_ECUs.jpg (149.35 KiB) Viewed 288 times
- Reading_DTS.jpg (192.16 KiB) Viewed 288 times
- Reading_DTS_2.jpg (164.59 KiB) Viewed 288 times
Re: Partial data read - only VIN
Posted: Tue Jul 28, 2026 10:55 am
by Teo
After that, i am cleaned DTS:
- Clearning_DTS.jpg (163.48 KiB) Viewed 288 times
And i have got 32 DTS:
- Reading_DTS_after_Clearning.jpg (178.13 KiB) Viewed 288 times
- Reading_DTS_after_Clearning_8.jpg (160.62 KiB) Viewed 288 times
If you need, i have all 8 screenshots...
Re: Partial data read - only VIN
Posted: Tue Jul 28, 2026 6:30 pm
by jpl250rs
wow 32 faults on 7d4 , that's a lot .
after erased , you still have 1 ?
Re: Partial data read - only VIN
Posted: Tue Jul 28, 2026 10:52 pm
by Teo
Some times 64 faults, but i did not foto its, after reload moto(turn off and turn on ignition) they are erased
Yes, 1 fault always returned and check engine still light.
Re: Partial data read - only VIN
Posted: Wed Jul 29, 2026 3:22 pm
by jpl250rs
i guess the true fault is the u100a then
Re: Partial data read - only VIN
Posted: Wed Jul 29, 2026 3:55 pm
by Teo
I used app for cars CarScaner it helped me erased fault. The fault was p0314:
- Screenshot_20260729_185641_Gallery.jpg (63.09 KiB) Viewed 238 times
Re: Partial data read - only VIN
Posted: Wed Jul 29, 2026 6:19 pm
by jpl250rs
was a fault reported in the different list ?
Re: Partial data read - only VIN
Posted: Wed Jul 29, 2026 6:39 pm
by Teo
It was only one fault in memory. p0314, and when i made test ride, it's returne
Re: Partial data read - only VIN
Posted: Tue Aug 04, 2026 3:36 pm
by jpl250rs
p0314 still not visible in jpdiag ?