Jpdiag

Hi JP, with all my heart I thank you so much for creating these wonderful things.
i have successfully reset the oil service and desmo on my ducati hypermotard 821 2014 using ecu 7sm. and i want to ask you if i can reset the TPS through this tool? i am having problem with the TPS parameters on the “test” page in the software. there is a huge difference between the 2 TPS sensors.
I will keep you updated on what works on your software.
Once again, I sincerely thank you for your dedication.

tps reading function has never been debugged with your bike , don't trust it too much.

by the way the TPS reset button shall be active and working

My car is currently reporting an engine fault with the P0150 error code (problem with the exhaust sensor in the vertical machine) although I have replaced the new sensor also measured the parameters of the sensor terminals to check and it is good. (eliminating problems related to the wires and connectors because I have checked them) currently the car is in safe mode - I cannot go over 4000 rpm when rolling.
after many checks through your software, I noticed that the TPS of the two machines are different (picture) so it makes me think about resetting the TPS but the software has no response like when I reset the oil service.
by the way, the functions such as fan test, injector test, throttle motor test, electric throttle sensing work well.

- TPS V: 29
- TPS H: 8