Can only get the vin using any bike option
Need to use the gear reset function as just replaced the gear position sensor
Thanks
Here is the report
"File generated On 2/6/26 5:39:11 PM"
"Software version 2.0.5.0"
"ELM version : ELM327 v1.4"
"Auto Detect Bike = Scrambler 803 2022"
"User Bike = scrambler 803 2022"
"CAN Bike = "
"Ecu = N/A"
"Hardw = N/A"
"Softw = N/A"
"OilService = NO"
"DesmoService = NO"
"
12 PIDS active founds
174_D67F0061F46A08CE
178_1280022EFE690822
17C_00800100177D08AA
024_0000000000040BE8
188_7FD37D8380734B04
022_000000000003FB6E
18C_8003800200000CF9
023_000000547F4F0BBD
020_0040001000000897
02A_0001800000000887
080_2BC2BC1F00200B15
100_C802000FFF001A52
"
"Vin = ML03K00AANT001010"
"DTC = "
"7A431B0E"
"Bike = 3"
"lic not found
hard :
soft :
PaniVIN:
MultiVIN:
M3dVin:
DashVin2: ML03K00AANT001010
"
"not registered"
License request
Forum rules
Do not send PM , if your can't find your problm , please open a new thread with your bike and issue
Do not send PM , if your can't find your problm , please open a new thread with your bike and issue
Re: License request
have you tried in the 2 modes ?
m3c and anybike ?
m3c and anybike ?
-
silverdragun
- Posts: 2
- Joined: Tue Jun 02, 2026 10:16 am
Re: License request
Yes
Any bike checkbox showed the vin
M3c one did not
If i click m3c and generate report
Vin not detected
"File generated On 3/6/26 11:59:54 AM"
"Software version 2.0.5.0"
"ELM version : ELM327 v1.4"
"Auto Detect Bike = "
"User Bike = scrambler 803 2022"
"CAN Bike = "
"Ecu = N/A"
"Hardw = "
"Softw = "
"OilService = NO"
"DesmoService = NO"
" vin:NO DATA>
12 PIDS active founds
174_DC7F0057E36A0694
178_00800E47046A06C9
17C_F07F0100107D0626
080_2BC2BC1F00200A08
100_C802000FFF001975
020_0040001000000358
02A_0001800000000348
188_7FDB7D77807B49EE
022_000000000003F954
18C_8003800200000AB7
023_000000547F570969
024_0000000000040BE8
"
"Vin = "
"DTC = "
"7A431B0E"
"Bike = 4"
"lic not found
hard :
soft :
"
"registered"
Any bike checkbox showed the vin
M3c one did not
If i click m3c and generate report
Vin not detected
"File generated On 3/6/26 11:59:54 AM"
"Software version 2.0.5.0"
"ELM version : ELM327 v1.4"
"Auto Detect Bike = "
"User Bike = scrambler 803 2022"
"CAN Bike = "
"Ecu = N/A"
"Hardw = "
"Softw = "
"OilService = NO"
"DesmoService = NO"
" vin:NO DATA>
12 PIDS active founds
174_DC7F0057E36A0694
178_00800E47046A06C9
17C_F07F0100107D0626
080_2BC2BC1F00200A08
100_C802000FFF001975
020_0040001000000358
02A_0001800000000348
188_7FDB7D77807B49EE
022_000000000003F954
18C_8003800200000AB7
023_000000547F570969
024_0000000000040BE8
"
"Vin = "
"DTC = "
"7A431B0E"
"Bike = 4"
"lic not found
hard :
soft :
"
"registered"
Last edited by silverdragun on Wed Jun 03, 2026 4:12 am, edited 2 times in total.
-
silverdragun
- Posts: 2
- Joined: Tue Jun 02, 2026 10:16 am
Re: License request
Sorry i didnt receive the license
Just found out there was typo to my email, it is corrected now
Please resend. Thanks
Just found out there was typo to my email, it is corrected now
Please resend. Thanks
Last edited by silverdragun on Thu Jun 04, 2026 10:22 am, edited 1 time in total.
-
silverdragun
- Posts: 2
- Joined: Tue Jun 02, 2026 10:16 am
Re: License request
Hi jp
I am not sure if theres something wrong with my email as i havent seen the license file yet . Apologize for the bother
I am not sure if theres something wrong with my email as i havent seen the license file yet . Apologize for the bother
Re: License request
i ve nothing pnding on my side
iy's not a problem of email , you 'r not getting data from bike , the form is not validated
not sure even with a licence it works too
iy's not a problem of email , you 'r not getting data from bike , the form is not validated
not sure even with a licence it works too