Jpdiag

Hi JPL
so i have loaded version 2.0.5.2, this now allows me to reset the TPS and APS. I also found that the ECU's can be read properly now.
Some other buttons like the Clutch switch, Fan test are not working.

Hi
so i have connected ok with bike. i can read things like TPS, MAP sensor, engine temp all these things.
But i am unable to reset TPS, it opens a new Melco Diag front page which is not connected, so i have 2 melco diag running, the new one has the warning about resetting/loosing UPMAP. I have to ...

Also i forgot to ask.
What Doe's this mean, the 'RBLI' ECU 7DF ,7E9 ?????
After replacing the M sensor would i need use the calibration function? and how would this work? is it safe, would i delete any thing?

Hi JP
So i have not yet tried to remove the M sensor plugs yet, work commitments. But what i have noticed is with the hot days the bike has become hard to start, just turning over and when it did start would not idle until warm, some times the engine would cut out when approaching a round about ...

Hi JP
Many thanks for the prompt registration file.
In your email you mention backing up the UMAP before making any Reset.
What is the UMAP? How do I know if I have one fitted? How can I back this up? Can you recommend any software.
Many thanks Rick.

Hi JPDIAG
So have installed cable bought on Ali Express and installed drivers, Although mine worked with CH340 USB Drivers.
i have a connection:

Hi All
My Panigale is new to me since October last year.
The bike warms up from cold ok, but if ridden and left for a while, I have noticed the warm engine will hunt on idle and stall if revved slightly. Again if left to warm up more (already warm engine not cold) the problem doesn’t happen.
On ...