Scrambler 1100 2022 help please

[Franksgarage]

Hi everyone. I found some old threads on other pages in regards to accessing the ECU on Scrambler 1100 models. I have a 2022 model and I can only retrieve the VIN and no other info using the latest Melcodiag and selecting 'Any bike' as I read that the bike has an M4C ecu. Any help from here is greatly appreciated.

Also I should mention I used a 6 pin Euro 5 red adapter to OBD, then to my ELM to USB on my Windows 10 PC. I have used the same ELM to USB with a 4 pin Ducati plug before with success on older models.

Thank you guys

[jpl250rs]

if the bike is recognized by melcodiag with one of the settings , that should be ok
have you a picture of the 6 pins adaptor ?

[Franksgarage]

This one

Screenshot_20250203_110849.jpg (46.26 KiB) Viewed 9337 times