Error ABS/DTC Monster 821

For bikes using the can line usually from 2010 and up
works with elm cables only
Forum rules
Do not send PM , if your can't find your problm , please open a new thread with your bike and issue
Post Reply
Manuel
Posts: 1
Joined: Fri Apr 17, 2026 3:53 am

Error ABS/DTC Monster 821

Post by Manuel »

Hello, I installed, registered, and was able to reset the oil change message on my Monster 821 without any problems. However, the ABS/DTC errors are frozen on the dashboard because I changed my battery and installed a new one, and I can't get the scan tool to detect the error. It simply responds with a "no response" message in the 500 field. I don't know if I've done something wrong or if the software simply can't perform this reading and diagnostic process.
Attachments
1.png
1.png (17.16 KiB) Viewed 755 times
Top
jpl250rs
Site Admin
Posts: 1199
Joined: Sat Jan 11, 2025 2:36 pm

Re: Error ABS/DTC Monster 821

Post by jpl250rs »

click on scan button to display more ecu , and check dtc on each on them
Top
Post Reply

Return to “Melcodiag”