2020 Diavel 1260

[Silentkr4ken]

Hi

I'm able to connect to the bike, although it shows VIN it shows no ECU type. It also shows the bike as 2019 but not sure that matters?

I sent off for a licence and got it back (blue "get licence" button has now disappeared). I try to reset the annual service but nothing works

[Silentkr4ken]

"File generated On 23/03/2025 19:57:10"
"Software version 2.0.4.4"
"ELM version : ELM327 v1.4"

"Auto Detect Bike = Diavel 2019"
"User Bike = 2020 Ducati Diavel 1260"

"CAN Bike = "
"Ecu = "
"Hardw = """
"Softw = 5"
"OilService = NO"
"DesmoService = NO"

" vin 145A8F035A444D4745303041414C42303034313736

13 PIDS active founds

020_0000790000004B7B
024_0000000020000674
080_19F2BC033000066E
100_C706043041000609
018_0002A00064004DA0
019_9609600000030EA1
188_7FEF7C53800F4B85
022_000000000003FB6E
023_000000007FC70BD1
240_0000012900116DC6
174_EC7F004B386A0A11
178_FA7F0530096C0A6B
17C_EA7F0100B4790AB0
"
"Vin = ZDMGE00AALB004176"
"DTC = "
"807B16FA"
"Bike = 3"
"lic found
lic is valid
ZDMGE00AALB004176
"
"registered"

[jpl250rs]

all looks ok to me
you have not much data displayed ,it means i have to improve melcodiag

other functions shall works

[JohnDeere01]

Check you are actually clicking the correct button for what service you want cleared.

I thought it was not working for me, then I realized I was clicking the Oil Service Reset button NOT the annual service button (2018 1260s Multi)

[Max999]

I have diavel 1260S 2022. Reset of PIN is not working. In the report shows "CAN ERROR" (I have 6 pin connector). What it means and what can I do?

[jpl250rs]

it means i maybe not sending the right command for your bike or i simply cannot send it cause it could be key protected and i don't have the key algorythm yet

for the can error, your elm return it cause its buffere is prolly flooded , if you can see some data like VIN , it's not a big deal

[Silentkr4ken]

Check you are actually clicking the correct button for what service you want cleared.

I thought it was not working for me, then I realized I was clicking the Oil Service Reset button NOT the annual service button (2018 1260s Multi)

Yes I'm definitely clicking the annual service button

[Silentkr4ken]

all looks ok to me
you have not much data displayed ,it means i have to improve melcodiag

other functions shall works

What's that mean?
Does that mean the cable is working?
What's the next steps/plan?

[Silentkr4ken]

viewtopic.php?t=71

In that topic someone seems to have the same issue as me and you've said MelcoDiag can't determine the bike, however on mine you've said everything is fine

Is mine fine despite having the same blank ECU type & hardware as displayed in the screenshot on the above topic?

I'm trying to figure out firstly is the cable I have working?

Secondly is MelcoDiag meant to be able to service reset a 2019/2020 Diavel 1260? If so then what's going wrong?

[jpl250rs]

yes your bike is fully recognized "Auto Detect Bike = Diavel 2019"
and i don't know yet why you can't succeed to reste , maybe i need to fix something, but i don't know what