JPDiag gets stuck on connecting

for bikes using kkl line , usually bikes before 2010
works with vagcom 409.1 ,galetto and elm cables
Forum rules
Do not PM , feel free to open a new post if you can find a thread talking about your issue
Post Reply
miky94
Posts: 7
Joined: Thu May 01, 2025 10:37 am

Re: JPDiag gets stuck on connecting

Post by miky94 »

In the pid file I only get a line break, I'm looking for the brake signal, there should be because I see the wires from the brakes going to the ecu
Top
miky94
Posts: 7
Joined: Thu May 01, 2025 10:37 am

Re: JPDiag gets stuck on connecting

Post by miky94 »

Is the brake contact a readable data?
Top
jpl250rs
Site Admin
Posts: 377
Joined: Sat Jan 11, 2025 2:36 pm

Re: JPDiag gets stuck on connecting

Post by jpl250rs »

no ,
there is no switch behind the lever right ??
Top
Post Reply

Return to “JPDiag”