Immobilizer Disable
Forum rules
Do not PM , feel free to open a new post if you can find a thread talking about your issue
Do not PM , feel free to open a new post if you can find a thread talking about your issue
-
shopPC1010
- Posts: 1
- Joined: Wed Jun 18, 2025 1:22 am
Immobilizer Disable
Is there anyway to disable the Immobilizer or get the PIN code from the ECU using the software ? I have a DTC E8 for the immobilizer “No or Poor Signal” and want to just disable it so I can run my bike.
Re: Immobilizer Disable
you need to reflash the ecu to disable the immo ,it's not possible via jpdiag only
Jpdiag can check if the ecu has the function disabled
Jpdiag can check if the ecu has the function disabled
Re: Immobilizer Disable
I have a writer program, but I can't rewrite, It tells me I don't have permission to install the map and remove the immobilizer. Could you please give me permission to write to 5aw, from your writerqc program? I could change the maps before. Thanks.
Re: Immobilizer Disable
is it still the same ecu ?
the licence is unlocked and placed in the writer directory ?
the licence is unlocked and placed in the writer directory ?