Does melcodiag work with Hypermotard 950? Can't get the licence.

[Hyper950]

Hello.
I'm using ELM327 V1.4 FT232RL 25K80



After connecting to bike its look like:



When trying get licence:



But after sending the sheet I got message:

Be sure you are using the right software and the rights cables for connecting to your bike , data are incomplete!
an m3c ecu use m3c9 software , a fuji ecu use melcodiag , a marelli 5am,5sm,59m,miu use jpdiag1

BTW:
MelcoDiag.exe.debug raport looks like:

Code: Select all

"File generated On 2025-03-02 11:10:36"
"Software version 2.0.4.4"
"ELM version : ELM327 v1.4"

"Auto Detect Bike = Hyp 950"
"User Bike = 2020"

"CAN Bike = "
"Ecu = "
"Hardw = "
"Softw = "
"OilService = NO"
"DesmoService = YES"

" vin 145A8F035A444D4242303041414D42303037333437
 vin 7F1A22
 vin 7F1A22
 vin 7F1A22

13 PIDS active founds 

018_0002A000420048FC  
019_960960000000083B  
024_0000000000000117  
080_23D23DC00520012D  
188_7FF77E3F8043465F  
022_000000000003F6EF  
023_000000547FBF06DE  
100_C8120040000001B6  
174_F87F00512F6A0338  
178_FC7F085FDB6A035D  
17C_02800100A17C037E  
020_00405500000001E9  
230_00801C00000004F2  
"
"Vin = >I erased it<"
"DTC = "
"A2866F33"
"Bike = 2"
"lic not found
>I erased it<
"
"not registered"

So. What I done wrong? I would like to reset a desmo service.

[jpl250rs]

ok , in your case as the ecu model name is not grabbed
before you press send button on the register page , replace the 1 st empty line with the mention : no ecu data
once the field will be populated it shall continue the registration process

[Hyper950]

Thanks for your reply.
Problem solved.

Everything works fine.
All services have been reset correctly.

Best Regards

[jpl250rs]

what did you reset exactly ?
i'll make a new thread with the successfull resets

[Hyper950]

I have used with successful this two options:



On dashboard:

[schmutzlutz]

Hey guys,

I also have an Hypermotard 950 (Build 2019) and had the same issue that Melcodiag could only read VIN and "Hyp 950". After following your post to mention "no ecu data" I got the license, but unfortunately the reset of the annual oil service does not work.

The only difference I see so far is, that Hyper950 requested OIL0_DES1 while I requested OIL1_DES0.

Do you think that could be the reason? Here my debug report:

Code: Select all

"File generated On 05.05.2025 21:27:40"
"Software version 2.0.4.4"
"ELM version : ELM327 v1.4"

"Auto Detect Bike = Hyp 950"
"User Bike = 2019"

"CAN Bike = "
"Ecu = "
"Hardw = "
"Softw = "
"OilService = YES"
"DesmoService = NO"

" vin 145A8F035A444D4242303041414B42303033333033
 vin 7F1A22
 vin 7F1A22
 vin 7F1A22

13 PIDS active founds 

17C_F47F010027790F35  
100_C812000000000DBE  
018_0002A000420065FA  
019_96096000000005BA  
022_000000000003F386  
188_7FEF7C2B80234308  
023_000000547FC303EB  
020_0040551000000E77  
024_0000000020000E9C  
080_23C23CC025200ED8  
174_F07F0050BF6A0088  
178_F27F00002F6B0017  
0_  
"
"Vin = <deleted>"
"DTC =  10115805100728100C68100D28D00C28513428000000 10115805100728100C68100D28D00C28513428000000"
"FCCA9193"
"Bike = 2"
"lic found
lic is valid
<deleted>
0120
037F2022

>
***reset date interval***
service date : 250505
0120
037F2022

>
0120
037F2022

>
"
"registered"

[jpl250rs]

OIL0_DES1 while I requested OIL1_DES0 only help me to debug
but people tick anything so i consider to remove this choice for next releases

did you press the 2 button , or just the annual button ?

[schmutzlutz]

I tried both buttons "Service Interval" and "Annual Service"

[jpl250rs]

i don't undestand why you can't delete is then
in the log i see only one button , it's why i asked

[schmutzlutz]

Ok, too bad.
Do you have any idea what I could do to make it work?

Could it be a Problem that there is an active dtc from exhaust valve?