License

[Tchase70]

Hello,

My software was previously unlocked, it’s been awhile but I had to get a new laptop and I’ve upgraded the ECU on the bike to a Corse.

I’m connecting fine and reading fine but can’t do anything as the software isn’t licensed to this ecu, back when I registered it was for only one bike.

I’ve submitted through the website twice now waiting a week each time and I have not received an email for license. Yes I’ve been watching my junk mail like a hawk.

Any help would be greatly appreciate.

T

[jpl250rs]

can you post a debug report ? i don't find any data from you except those in 2014

[Tchase70]

Hello,

I'm not seeing where to run a debug report, this is the only log I can get

: 32A0A0PD004
: IAW5AMHW610
: 00
:
: 0000
:
: 00 00 00 00 00
: DUC
: 20 13 06 05
: 7F9C1WD5N
: 7F9C1WD5N

[jpl250rs]

you can run a report with melcodiag only

[shwartz]

Hi there,
I have got a licence recently for MONSTER 696 2009 bike, with the ECU S180040101 A and serial number 285327289. I copied the "cle.lic" file into the JPDIag's folder and nothing happens (I use Windows 10 x64 as my environment, no virtualization). I still able to run JPDiag, connection with my bike is okay and I can see its IDs but there is no licence have been seen by the software. Could anyone help me please?
thanks!

[jpl250rs]

have yo done the tests in this post viewtopic.php?t=5 ?

[shwartz]

yes, I did.
I've tried to do the same stuff on Windows 7 platform and still having the same issue. Please look at attached picture
Thanks!

P.S. I have the siemens-continental ECU

[jpl250rs]

you can give melcodiag a try selecting m3c ecu.
then you can register from there if the lic is still not recognized

the old m3c9 software is not supported anymore

[shwartz]

Got it! The license didn't work for me with Melcodiag. I've made a new request for it! Many thanks for your help
P.S. Melcodiag has been working with the new license very well! Many thanks to author.